Home Contact Sitemap Checkout
Home/Installation Print This Page


project x60 Coloured PPF Installation Tips

project x60 Coloured PPF is wet-apply and self-healing with a nano-ceramic coating.

It is made using thermoplastic polyurethane (TPU), with a colour layer added. So for that reason you will find it’s not quite as pliable as regular clear PPF.

project x60 Coloured PPF is a low tack film and the adhesive achieves full adhesion after 48 hours. So while that offers many advantages, it is important to keep that in mind while working with the film. 


Instructions

  1. Start the install by cleaning the surface of the vehicle using a mixture of isopropyl alcohol and water (reverse osmosis or deionized water is best). We recommend 90% alcohol, 10% water.
  2. We recommend light use of adhesion promoters on edges and deep recesses to ensure the film has an opportunity to adhere (Xpel PPF Surface Prep or Pro Bond Adhesive Promoter work great. We do not recommend 3M Primer 94). Apply, then let dry.
  3. Prepare your slip solution with very gentle soaps such as baby shampoo or non-toxic dish soaps.
  4. For your tack solution, some installers like to only use reverse osmosis or deionized water, where others like to add about 10-20% isopropyl alcohol. We recommend the use of a small amount of isopropyl alcohol.
  5. Install with hot water or utilize a steamer to relax the film and help with corners and curves. Treat the film like calendared vinyl; feed recessed areas first to mitigate tension, squeegee down, and then do the flat stuff after!
  6. Carefully post-heat with a heat gun 45-55° Celsius on main panels, and as high as 85-95° Celsius for recessed areas, edges, overlaps, and corners.

In the end, you’re left with an incredible wrap job that has a ridiculous amount of depth and clarity! Plus, a finish that will last and protect the vehicle's paint while doing it.

Tips

project x60 Coloured PPF requires advanced installation techniques. It is highly recommended that our film is installed by an experienced professional. project x60 does not warranty damage caused by rough handling or improper installation of the product.

TACK TIPS: Given the low tack of project x60 Coloured PPF, we recommend much less soap in your solution than regular clear PPF installation (just a couple drops or none at all).

INLAY TIPS: If you find the ceramic coating is interfering with your ability to overlap the film, you can carefully heat the top of the layer you're looking to adhere to and "flash" the ceramic coating with a torch. This will encourage the two layers to stick! 

HANDLE WITH CARE: Given the construction of Coloured PPF, it is imperative that you handle with care. Be careful not to bend or kink the film, as well as overheating or overstretching. These actions will compromise the film or create imperfections.


 

Learn more



Join the community

Because when you drive, you don’t just arrive. You make an entrance.